Blog /
Buying Guides

Buying an Independent House in Hyderabad: Reading the TG-bPASS Permission Tiers

TG-bPASS, launched in tune with the Telangana Municipalities Act, 2019, processes building permissions through self-certification in tiers: instant registration for plots up to 75 square yards, instant approval up to 500 square metres and 10 metres for residential, and single window above that. Here is how a buyer of a resale or new independent house can use those tiers to check paperwork.

Buying Guides
Updated on
November 21, 2026
12 min read

75 square yards. In Telangana's building permission system, that number decides whether a small house needs a building permission at all. Above it, the next line that matters is 500 square metres and 10 metres of height. Above that, a third route applies. For anyone buying an independent house in Hyderabad, new or resale, these lines are a quick way to work out which papers the seller should be able to show, and which questions to ask if they cannot.

The permissions are processed through TG-bPASS, the state's online building permission platform. HMDA's own website says building permissions are now processed exclusively through it. This guide explains the tiers in plain language using only what the TG-bPASS website itself says, and turns them into a checklist a buyer can carry to a site visit.

The short answer. The TG-bPASS website describes three tiers for residential construction. Plots up to 75 square yards with ground or ground plus one floor need no building permission or occupancy certificate, only a registration with a Rs 1 token. Plots up to 500 square metres with height up to 10 metres get instant online approval through self-certification. Larger plots go through a single window. The trade-off: self-certification makes approval fast, but the platform also says permissions are post verified and audited, so a house that does not match its approved plan can carry risk that passes to the next owner.

What is TG-bPASS and why does it matter to a buyer?

It is the platform through which HMDA says building permissions are now processed. The TG-bPASS website says the Government of Telangana, in tune with the Telangana Municipalities Act, 2019, introduced it as a single integrated platform for processing the various permissions required during development of land and construction of buildings through a self-certification system.

For a buyer, TG-bPASS matters because it is where the permission for the house you are looking at should be traceable. HMDA's website, which PropNewz covered in today's guide to the extended HMDA region, says building permissions will now be exclusively processed through TG-bPASS only. If a seller tells you the house is approved, the natural next question is which TG-bPASS permission covers it.

Does a small house on a 75 square yard plot need a permission?

Not a building permission, but it does need a registration. The TG-bPASS website says that for a plot size of up to 75 square yards and construction of ground or ground plus one floor for residential use, no building permission and occupancy certificate is required. It adds that the applicant is required to register with a token of Rs 1.

Read that carefully. The exemption is tied to both the plot size and the number of floors. A 70 square yard plot with three floors does not fit the description. Nor does a plot used for something other than residential construction. If you are buying a small house, ask the seller for the TG-bPASS registration, and check that the built floors match what the exemption covers.

The exemption from a building permission is also not a statement about title. A small house still needs clean ownership documents, and the land under it still needs to be land that can lawfully be built on.

How does instant approval work for mid-sized plots?

Through online self-certification, for residential plots of up to 500 square metres and height up to 10 metres. The TG-bPASS website describes this as instant online building permission approval. In practice, the applicant certifies that the proposal complies with the rules, and the permission is issued on that basis.

Self-certification shifts responsibility onto the person who applies. The TG-bPASS website lists post verification of the permissions issued as one of its features, and says the system undertakes random audits, with any citizen or official deviating from the rules to be penalised. For a resale buyer, this is the key point. If the original owner certified one plan and built another, the gap does not disappear when the house changes hands.

So the useful document here is not just the permission letter. It is the approved plan attached to it. Compare the setbacks, the number of floors and the built-up footprint on the plan with what you see on site. An extra floor or a covered setback is easy to spot once you have the plan in hand.

What changes for plots above 500 square metres?

The route changes to a single window. The TG-bPASS website says that for plot size above 500 square metres and height above 10 metres, residential and non-residential, there is a single window system for obtaining multiple NOCs using a Common Application Form, with approval through online self-certification. It also says citizens can obtain NOCs from all the line departments using that single form.

Most independent house buyers will not be in this tier, but villa buyers in larger developments, or buyers of a big standalone house, may be. For those properties, ask which NOCs were obtained along with the permission, not just whether a permission exists.

The table below puts the three tiers side by side, along with the occupancy certificate rules, using only what the TG-bPASS website states.

SituationWhat the TG-bPASS website saysWhat a buyer should ask for
Plot up to 75 sq yd, ground or ground plus one, residentialNo building permission and occupancy certificate required; register with Rs 1 tokenTG-bPASS registration, and floors matching the exemption
Plot up to 500 sq m, height up to 10 m, residentialInstant online building permission through self-certificationPermission letter and the approved plan
Plot above 500 sq m, height above 10 mSingle window, Common Application Form for multiple NOCsPermission plus the NOCs obtained
Individual house on plot above 200 sq m up to 500 sq m, height up to 10 mOccupancy certificate processed through the platformThe occupancy certificate itself
Any permission issuedPost verification of permissions issued; random auditsA site match against the approved plan

When should a house come with an occupancy certificate?

For many mid-sized and larger houses, yes, it should. The TG-bPASS website describes occupancy certificates for individual residential buildings constructed on plots above 240 square yards, or 200 square metres, and up to 600 square yards, or 500 square metres, with height up to 10 metres, which it describes as ground plus two floors. It separately describes processing of occupancy certificates for non-high-rise buildings on plots above 200 square metres and less than 500 square metres, and for high-rise buildings and buildings on plots of 500 square metres, through online self-certification.

If the house you are buying sits in that range and the seller has no occupancy certificate, ask why before you go further. The answer may be innocent, for example an older house built under an earlier system, but it should be explained in writing and checked by a lawyer.

Houses on plots of up to 75 square yards with ground or ground plus one floor are the exception the website names: no occupancy certificate is required for them.

What should I check before paying for an independent house?

Permission, plan, construction and title, in that order. A gated villa project such as Casagrand Belair in Gowdavalli will usually come with project level approvals and a single developer to ask. A standalone resale house comes with whatever the previous owner kept. In both cases, the checklist below applies.

  1. Measure the plot against the sale documents and work out which TG-bPASS tier it falls in.
  2. Ask for the TG-bPASS registration or permission number and issue date, in writing.
  3. Get the approved plan and compare floors, setbacks and footprint with the house on site.
  4. For a house on a plot above 200 square metres, ask for the occupancy certificate.
  5. For a plot above 500 square metres, ask which NOCs were obtained through the single window.
  6. Have a lawyer trace title through earlier sale deeds and check for any registration bar on the land.
  7. Budget for stamp duty, transfer duty, registration fee and mutation on top of the price before you sign.

On the last point, PropNewz set out how Telangana's registration charges add up for a buyer in a separate explainer on stamp duty and transfer duty.

What if the house was built without matching the plan?

Then the buyer needs to understand the gap before deciding. The TG-bPASS website does not set out a regularisation route for deviations, so this guide does not describe one. What it does say is that permissions are post verified and audited, and that anyone deviating from the rules will be penalised.

In practical terms, that means a deviation is not just the seller's problem. Once you own the house, it is yours to deal with. Some buyers will walk away. Others will negotiate, or ask the seller to resolve the issue before registration. Either way, the decision should be made with a lawyer and, where the deviation is structural, an engineer, not on the strength of a verbal assurance at the site.

Keep a copy of every document the seller shows you, and photograph the house as it stands on the day you inspect it. If questions come up later, a dated record of what you were shown is useful.

Frequently asked questions

Does a small house in Hyderabad need building permission?

The TG-bPASS website says that for a plot of up to 75 square yards with ground or ground plus one floor residential construction, no building permission and occupancy certificate is required. The owner must instead register on TG-bPASS with a token of Rs 1, so ask for that registration.

What is instant approval under TG-bPASS?

The TG-bPASS website describes instant online building permission approval for residential plots of up to 500 square metres with height up to 10 metres, through online self-certification. A buyer should ask for that permission and compare the approved plan with the house actually built.

Which houses need an occupancy certificate under TG-bPASS?

The TG-bPASS website describes occupancy certificates for individual residential buildings on plots above 240 square yards, or 200 square metres, and up to 600 square yards, or 500 square metres, with height up to 10 metres, and for larger and high-rise buildings, processed through online self-certification.

Can a permission issued through self-certification be checked later?

Yes. The TG-bPASS website lists post verification of the permissions issued among its features and says the system undertakes random audits, with any citizen or official deviating from the rules to be penalised. That is why a buyer should match the house to the approved plan.

This guide summarises information published on the TG-bPASS and HMDA websites and is not legal advice. Have a lawyer and, where needed, an engineer review the house before you pay.

Last updated 2026-11-21. PropNewz Team.

Contact Us

Stay updated with latest news and new projects!

Thank you! Your submission has been received, We'll get back in touch with you shortly.
Oops! Something went wrong while submitting the form.
No pressure, ever

Tell us what you want, We'll do the rest.

Share your budget and where you're looking. An advisor who has actually walked the sites will shortlist a handful of RERA-registered projects and tell you which to skip.

We only contact you about projects you ask about
No spam, no reselling your number, unsubscribe anytime
Independent advice we're paid the same whoever you pick
Thank you! Your submission has been received, We'll get back in touch with you shortly.
Oops! Something went wrong while submitting the form.