Still on an MCLR Home Loan in Bengaluru? How RBI's Rules Let You Switch to a Repo-Linked Rate
Paragraph 41 of the RBI (Commercial Banks, Interest Rates on Advances) Directions, 2025 lets borrowers eligible for charge-free prepayment switch MCLR loans to an external benchmark without fees beyond reasonable admin or legal costs, and says the switch is not a foreclosure. Reset rules compared.
Pull out the sanction letter of a Bengaluru home loan taken around 2017 or 2018 and look for one word in the interest clause: MCLR. If it is there, the rate on that loan is tied to the bank's own lending benchmark, and it resets on a schedule the bank chose, often once a year. Under the RBI's current directions, floating rate home loans from banks are benchmarked to an external rate such as the RBI policy repo rate instead. If your loan still carries the older benchmark, two questions follow: can you switch, and would switching count as closing the loan?
The Reserve Bank of India's Commercial Banks (Interest Rates on Advances) Directions, 2025 answer both points. This guide explains how an MCLR loan differs from an external benchmark loan, who can switch without charges, and what to ask your bank.
The short answer. Under paragraph 41 of the RBI directions, existing MCLR, base rate and BPLR linked loans continue until repayment or renewal, but borrowers who are eligible to prepay a floating rate loan without charges are eligible to switch to an external benchmark without any charges or fees except reasonable administrative or legal costs, and the switch is not treated as a foreclosure. External benchmark loans must reset at least once in three months, while MCLR loans reset at a periodicity of one year or lower set in the contract. The trade-off: an external benchmark loan passes on repo cuts faster, and repo increases just as fast.
What is the difference between MCLR and an external benchmark?
MCLR is an internal benchmark, a reference rate determined by the bank itself. An external benchmark, as the directions define it, is a reference rate such as the RBI policy repo rate, the Government of India three month or six month Treasury Bill yields published by Financial Benchmarks India, or any other benchmark market interest rate published by it.
Paragraph 25 says all floating rate personal or retail loans, including housing loans, shall be benchmarked to an external benchmark rate, and paragraph 27 says a bank must adopt a uniform external benchmark within a loan category, so one bank cannot use different benchmarks for different home loan customers. The RBI's current rates panel shows the policy repo rate at 5.50 percent.
How often does each kind of loan reset?
For MCLR loans, paragraph 34 says the bank may, at its option, specify reset dates linked either to the date of first disbursement or to the date of review of MCLR. Paragraph 35 says the MCLR prevailing on the date of first disbursement applies until the next reset date, irrespective of changes in the benchmark in between. Paragraph 36 says the periodicity of reset shall be one year or lower, and paragraph 37 says it corresponds to the tenor of the MCLR to which the loan is linked.
For external benchmark loans, paragraph 38 is shorter: the interest rate under an external benchmark shall be reset at least once in three months.
In practice, that means a repo-linked loan reflects a benchmark change within one quarter of a reset cycle, while an MCLR loan with an annual reset can carry the old rate for up to a year, in either direction.
A simple timeline makes the gap concrete. Suppose your MCLR loan is linked to the bank's one year MCLR and its reset date is in July. Under paragraph 35, the rate fixed at the July 2026 reset stays until the July 2027 reset, whatever happens to the bank's MCLR in the meantime. A repo-linked loan with a quarterly reset in the same period would be repriced at least four times. If rates are falling, the MCLR borrower waits; if rates are rising, the MCLR borrower is shielded for longer. That asymmetry is the real choice you are making.
| Feature | MCLR-linked loan | External benchmark loan |
|---|---|---|
| Benchmark | Bank's internal MCLR | Repo rate, FBIL T-bill yields or other FBIL benchmark |
| Reset frequency | One year or lower, matching the MCLR tenor (paras 36, 37) | At least once in three months (para 38) |
| Rate between resets | MCLR at first disbursement applies till next reset (para 35) | Benchmark plus spread, reset per contract |
| Spread changes | Not increased except for deterioration in credit risk profile (para 31) | Credit risk premium on substantial change; other parts once in three years (para 33) |
| Switching to the other | Eligible borrowers switch without charges, except reasonable admin or legal costs (para 41) | Not applicable |
Who can switch from MCLR to an external benchmark without charges?
Paragraph 41 says existing loans linked to MCLR, base rate or BPLR shall continue until repayment or renewal. Its first proviso then says floating rate term loans sanctioned to borrowers who, under extant guidelines, are eligible to prepay a floating rate loan without prepayment charges shall be eligible for switchover to the external benchmark without any charges or fees, except reasonable administrative or legal costs.
Under the RBI's conduct directions, individuals with floating rate loans taken for purposes other than business cannot be charged prepayment charges by banks. An individual Bengaluru buyer with a floating rate home loan taken for a home, not a business, would therefore typically fall in the eligible category. Other existing borrowers, the paragraph adds, have the option to move at mutually acceptable terms.
What rate will I get after switching?
The proviso fixes the reference point. The final rate charged to eligible borrowers after the switchover shall be the same as the rate charged for a new loan of the same category, type, tenor and amount, at the time of origination of the loan. Ask the bank to show you, in writing, which new loan it is using as the comparator and how it arrived at the spread.
A second proviso protects your loan's continuity: the switchover shall not be treated as a foreclosure of the existing facility. You are not closing one loan and opening another, so your repayment history and the security arrangement stay with the same account.
What happens to my spread after the switch?
The spread is the part of your rate above the benchmark, and the directions fence it differently under each system. For MCLR loans, paragraph 31 says the spread charged to an existing borrower shall not be increased except on account of deterioration in the credit risk profile of the customer, supported by a full-fledged risk profile review. For external benchmark loans, paragraph 33 says the credit risk premium may change only when the borrower's credit assessment undergoes a substantial change, as agreed in the loan contract, and other components, including operating cost, could be altered once in three years.
The same paragraph allows banks to reduce the other spread components earlier than three years for a loan category, for customer retention, on justifiable grounds and in a non-discriminatory manner as per bank policy. When you switch, ask for the spread to be broken into its components in writing, so that you can check any later change against these rules.
Is switching always better?
Not automatically. The RBI's rates panel currently shows overnight MCLR across banks in a range of 7.85 to 8.10 percent, but your loan's MCLR tenor and spread decide your actual rate, and the external benchmark rate you would get depends on the bank's spread for comparable new loans. Compare your current rate with the rate the bank offers after switching, on the same outstanding amount and remaining tenure.
Think too about which way rates might move. An external benchmark loan transmits repo changes at least once a quarter, so you gain faster from cuts and feel increases faster too. Nobody can promise the direction of the next move. Choose the structure you are comfortable living with through both.
For the EMI side of that decision, our worked example of a Rs 80 lakh Bengaluru loan at repo 5.50 percent shows how a quarter point change moves the EMI.
How do I ask my bank to switch?
The directions set the entitlement; the paperwork is the bank's. Keep the request short, specific and in writing.
- Find the benchmark clause in your sanction letter and confirm the loan is linked to MCLR, base rate or BPLR.
- Note your current rate, MCLR tenor, next reset date, outstanding principal and remaining EMIs.
- Write to the bank asking to switch to its external benchmark linked rate under paragraph 41 of the RBI directions.
- Ask for the post-switch rate, the comparator new loan used to set it, and the spread breakdown.
- Ask for a list of any administrative or legal costs, since other charges or fees should not apply to eligible borrowers.
- Confirm in writing that the switch will not be treated as a foreclosure of your loan.
- After the switch, check the next quarterly statement for the new rate and remaining EMIs.
For the related reset rules, see our guide to what a rate reset costs and the choices your bank must offer.
Frequently asked questions
Can I move my MCLR home loan to a repo-linked rate?
Yes. Paragraph 41 of the RBI interest rate directions says borrowers who are eligible to prepay a floating rate loan without prepayment charges are eligible to switch to an external benchmark without any charges or fees, except reasonable administrative or legal costs. Other borrowers may switch at mutually acceptable terms.
Will switching benchmarks count as closing my loan?
No. Paragraph 41 of the RBI directions says the switchover shall not be treated as a foreclosure of the existing facility. Your loan continues as the same account, with the new benchmark and spread applied to the outstanding amount from the date of the switch.
How often does an MCLR loan reset compared with a repo-linked loan?
Under the RBI directions, an MCLR loan resets at a periodicity of one year or lower, matching the tenor of the MCLR it is linked to, as set in the loan contract. An external benchmark loan, such as a repo-linked loan, must reset at least once in three months.
What rate will the bank charge after I switch?
The RBI directions say the final rate for eligible borrowers after switching shall be the same as the rate charged for a new loan of the same category, type, tenor and amount, at the time of origination of the loan. Ask the bank to show the comparator in writing.
Last updated 2026-11-19. PropNewz Team.
Contact Us
Stay updated with latest news and new projects!
Tell us what you want, We'll do the rest.
Share your budget and where you're looking. An advisor who has actually walked the sites will shortlist a handful of RERA-registered projects and tell you which to skip.